Mirror's holder CO2 Laser machine head

Description

The mirror support for CO₂ laser machines is designed to support the laser mirrors and provide stability in the transit of the laser beam. It also has adjustment screws and its respective reinforced aluminum structure. These supports are installed next to the rail and in the tube compartment. Their installation is quick, simple and will extend the useful life of the CO₂ laser machines.

Specifications

Model	PT-320
Material	Reinforced aluminum
Dimensions	H 49 mm x L 40 mm x W 30 mm
Laser Mirror Compatibility	20 mm
CO₂ laser machine compatibility	IMPA/KEYLAND KL320 laser machine, SP6040

Roller chain for DMAIS sprocket
Model: 06B-1
COP $ Pitch: 10 mm Tensile strength: 9.0 kN Material: Steel
SPECIFICATIONS
CO₂ Laser machine head AEON NOVA
Material: Aluminum Alloy
COP $ Lens Compatibility: 20 mm Focal Length: 60.8 Length: 181 mm
SPECIFICATIONS
Motor Timing Belt 15mm
Belt for Laser Machine
COP $ 15mm Width 3mm pitch between tooth and tooth
SPECIFICATIONS
Laser Limit Sensor
SWITCH BN, BK, BU
COP $100,000 BN: 6V - 36V DC BU: 0 - 300mA Vertical and horizontal sensor
SPECIFICATIONS
NEMA 34 Stepper Motor
Step motor X axis and Y axis
COP $ 290.000 Voltage: 4.8 V Maximum current / phase: 6.0 A Dimensions: 110 mm x 110 mm Motor type: Bipolar
SPECIFICATIONS
HoneyComb Work Table laser machine 30x20
Work tray for Co2 machine 30x20
COP $ Material: Aluminum and galvanized steel Dimension: 300mm x 200mm Type: Honeycomb
SPECIFICATIONS
Board M2 Nano
Allows real-time control of the laser system over the USB 2.0 interface
COP $ Dimensions: L97.0mm x W64mm Power supply: DC5V Supply current: 3A Support software: Corellaser, LaserDRW, WinsealXP
SPECIFICATION
Compressor Air Pump CO₂ 135 W
This device is designed for the emission of clean air
COP $ Voltage: 220V Power: 135W Pressure: 20.04 M / Pa Air outlet: 125L / min
SPECIFICATIONS
Compressor Air Pump CO₂ 35 W
This device is designed for the emission of clean air
COP $ Operating voltage: 4.8V Maximum current / phase: 6.0A Body dimensions: 110mm x 110mm Motor type: Bipolar
SPECIFICATIONS
CO₂ Laser machine head (Small)
Replacement head for CO₂ laser machines
COP $364,000 Material: High quality aluminum alloy Mirror diameter: 25mm Lens diameter: 20mm Lens focal length: 55mm from lens
SPECIFICATIONS
High voltage connector for CO₂ laser
For CO₂ laser power supply and laser tube and laser cutting machine
COP $24,100 Voltage: 40KV 22 AWG Supported sources: 40W, 50W, 60W, 130W, 80W, 100W, 150W, etc Material: Lead with tough rubber coating
SPECIFICATIONS
Ruida Technology Remote Control
It can be widely used in laser cutting, laser engraving, laser welding and other fields. Suitable for large format laser processing machines.
COP $430,000 Dimensions Remote control: L: 131 mm W: 23 mm H: 67 mm Battery type: Type AA Adapter dimensions: L: 57 mm W 25 mm H 43 mm
SPECIFICATIONS
Loop Timing Belt Closed
This timing belt takes on the function of transmitting mechanical energy between one drive pinion and another through a mutual toothed system.
$ Material: Neoprene rubber with fiberglass core References: B110MXL, B99MXL, HTD294-3M
SPECIFICATIONS
Motor timing belt 5 mm
Belt for laser machine CO₂
COP $53,600 5 mm Width 1 mm Pitch between tooth and tooth
SPECIFICATIONS
Led display Ruida Technology system
This display is designed to be compatible with Ruida Technology systems.
COP $773,500 Screen dimension: 5.7 inches Screen type: TFT (LCD) External dimensions: L 7.9 x W 5.1 x H 0.3
SPECIFICATIONS
HD2AC voltage filter - 10A
Imported linear guide rail and high-speed stepper motor and driver to make the cutting edge smooth
COP $ Dimensions: 3.15 x 1.97 x 1.18 inches Material: Metal Voltage: 110 / 250VAC
SPECIFICATION
Silicone Hose 4×6 cm CO₂ laser tube
This silicone hose transports the flow of water inside the laser tube that allows cooling of the laser tube and improves life
COP $13,400 External thickness: 6 mm Internal thickness 4 mm Material: Silicone
SPECIFICATIONS
Analog Milliampere Meter
Analog Ampere Meter Panel for Co2 Laser Machines
$ 13.23 Size: 63x55mm Dielectric voltage test: Can withstand 2000V voltage for 1 minute Accuracy: 2.5
SPECIFICATIONS
Digital Stepper Driver 2M-542
It can be used for different engines with corresponding operating parameters, The engine running very smooth and very low noise.
$ 53.52 Supply voltage: 20-50 VDC Pulse input frequency: 200KHz Output current: 1.0 A ~ 4.2 A
SPECIFICATIONS
Digital Stepper Driver 2DM-860
Built-in micro step technology greatly improves stability and reduces noise in low micro steps
$ 85.29 Logic input current: 10 ma Output current: 2.1 Min - 8.6 Max Pulse input frequency: 20KHz
SPECIFICATIONS
NEMA 17 Stepper Motor
Discrete angular displacement motor, used for machinery in the Graphic industry.
COP $290,000 Step angle: 18° Rated voltage: 18V Rated current: 0.4 A Phase number: 2
SPECIFICATIONS
CO₂ laser machine Rotary system
Ideal for laser engraving of cylindrical surfaces
COP $840,000 Compatible with different systems Compatible with different models of laser machines
SPECIFICATIONS
MiraPlus CO₂ Laser Machine Rotary System
Ideal accessory for laser engraving of cylindrical surfaces
COP $1,040,000 Work area: W 100mm x L 410mm Nominal Speed: 200 RPM Motor type: Nema 45 step motor Model: Mira plus
SPECIFICATIONS
Ruida RD - Wifi
Ruida-RD-WIFI Wireless Network Instruction, Laser Driver
COP $235,000 Wireless communication range: 100 meters Transmission rate: 150 meters AC voltage: 220V Ambient temperature: 20°C - 70°C
SPECIFICATIONS
Water Flow Sensor
Water flow sensor designed to protect the laser tube
COP $90,000 Tube power: 40w/60w/80w laser tube Flow: 3,000 L/H Rated power: AC 0-110V 0.2A
SPECIFICATIONS
CO₂ Laser tube holders
Change bracket for EFR brand laser tube
COP $70,000 Diameter: 50mm - 80mm Length: 7.8 inches Width: 5.4 Inches Height: 4.3 Inches
SPECIFICATIONS
Motherboard DSP system Laser Ruida 6442s
Controller for CO₂ laser cutting and engraving machine
COP $2,287,200 Screen type: TFT (LCD) Display: 3.5 " Power: DC24V 3A
SPECIFICATIONS
Motherboard DSP system Laser Ruida 6445G
Controller for CO₂ laser cutting and engraving machine
COP $2,287,200 Display: 4.7 " Brand: Ruida Supported Software: RDWorks V8 Power Supply: DC24V 3A
SPECIFICATIONS
EZCAD Mainboard
This card is used for Fiber laser marking and engraving machines on metallized materials
$ 3657.10 Dimensions: L12mm x W85mm Supply Voltage: DC 5V
SPECIFICATIONS
Hydraulic gas spring laser machine 500N
Hydraulic arm for laser machine gate or CNC machine gates.
COP $ Certification: GB25751-2010 Total length: 182mm Force: 500N Connector Type: Awl-pj-06 (Flat Type)
SPECIFICATIONS
Hydraulic gas spring laser machine 700N
Hydraulic arm for laser machine gate or CNC machine gates.
COP $ Certification: GB25751-2010 Total length: 240mm Force: 700N Connector type: Awl-pj-18 (spherical with nut extension) (Nut extension length 28 mm)
SPECIFICATIONS
Industrial fan 220v for CO₂ laser machine
Speed: 2850 r/min
COP $690,200 Power supply: 220V/60Hz Productivity: 1080 m³/h Pressure: 1700 Pa Speed: 2850 r/min
SPECIFICATIONS
YILONG High power air pump
This compressor allows a free flow of air and greater pressure in it, thus optimizing its operation.
COP $ Model: YL-250A Brand: Yilong Power Voltage: 110 VAC
SPECIFICATIONS
CO₂ Laser machine head (Big)
Replacement head for CO₂ laser machines
COP $433,200 Material: High quality aluminum alloy Mirror diameter: 25mm Lens diameter: 20mm Lens focal length: 55mm from lens
SPECIFICATIONS
Mirror's holder CO₂ Laser machine head
CO₂ laser machine compatibility: IMPA/KEYLAND KL320, SP6040
COP $ Dimensions: H 49 mm x L 40 mm x W 30 mm Material: Reinforced aluminum Laser mirror compatibility: 20 mm
SPECIFICATIONS
Tray honeycomb CO₂ Laser machine 30x20
Work tray for CO₂ machine 30x20
COP $147,000 Material: Aluminum and galvanized steel Dimensions: 300 mm x 200 mm Type: Honeycomb
SPECIFICATION
Auto focus sensor CO₂ Laser machine
It facilitates the location of the design, which provides more efficiency in production times.
COP $38,000 Dimensions: 354 mm x 10 mm Laser wavelength: 650 nm Light Power: <56 mW
SPECIFICATIONS
Industruial chiller Water filter
Cleans the water that enters a laser tube in the process of cutting or engraving material.
COP $ Traps and removes particles. Improves tube and Chiller performance. Adaptable to water flow
SPECIFICATIONS
Main board M3 Nano
Allows real-time control of the laser system over the USB 2.0 interface with improved data transfer.
COP $ Dimensions: L 97 mm x W 64 mm Power supply: DC5V Supply current: 3A Software: Corellaser, LaserDRW, WinsealXP
SPECIFICATIONS
NEMA 23 Stepper motor
Electromechanical device that converts a series of electrical impulses into discrete angular displacements
COP $319,000 Rated Current/Phase: 2.8 A Voltage: 2.5 V Phase resistance: 0.9 ohms Motor type: Bipolar
SPECIFICATIONS
NEMA 42 Stepper motor
Dimensions: 110 mm x 110 mm
COP $290,000 Type: Bipolar stepper Step Accuracy: ±5% (No-Load Timing) Displacement angle: 1.8º/step Voltage: 4.8 V
SPECIFICATIONS

Co2 Laser Supplies

Medios de pago (ES) (EN)

whatsapp boton